1. <cite id="vkmze"></cite>
    2. <tt id="vkmze"><td id="vkmze"></td></tt>
      1. <tt id="vkmze"><track id="vkmze"><ins id="vkmze"></ins></track></tt>

        DIP-DC.CAP

        Ceramic Capacitor
        溫度特性(Temperature characteristic):SL、B、E、F; 容量偏差(Tolerance):J(±5%)、K(±10%)、M(±20%); 耐電壓(Voltage):1500VDC; 絕緣電阻(Insulation resistance):≥4000MΩ; 阻燃等級(Passive flammability):B;

        PDF下載

        說明


        model and size code

        產品型號

        尺寸代碼

        VDC

        額定直流電壓

        Nominal capacitance標稱電容量

        Size尺寸(mm)

        電容量溫度系數組別

        Dmax

        Tmax

        F

        d

        ±0.05

        CH(NP0)

        UJ

        SL

        CC1-05

        50V

        0P5~560

        0P5~820

        180~221

        5.5

        4.0

        5.0

        0.45

        CC1-06

        620~101

        101

        221~271

        6.5

        4.0

        5.0

        CC1-08

        111~151

        121~151

        301~431

        8.0

        4.0

        5.0

        CC1-10

        181~271

        181~331

        471~681

        10.0

        4.0

        5.0

        CC1-12

        301~391


        751~102

        12.5

        4.0

        5.0

        CC1-05

        500V

        0P5~330

        0P5~390

        180~121

        5.5

        4.0

        5.0

        0.45

        0.55

        CC1-06

        360~560

        400~680

        121~151

        6.5

        4.0

        5.0

        CC1-08


        820~101

        181~271

        8.0

        4.0

        5.0

        CC1-10


        121~151

        331~471

        10.0

        4.0

        5.0

        CC1-12


        181~221

        561

        12.5

        4.0

        5.0

        CC81-06

        1KV

        0P5~220

        0P5~330

        180~101

        6.5

        4.0

        5.0

        7.5

        10.0

        0.45

        0.55

        CC81-08

        270

        390~680

        151~181

        8.0

        4.0

        CC81-10

        330~680

        820~151

        221471

        10.0

        4.0

        CC81-12

        820~271

        181~271

        561

        12.5

        4.0

        CC81-06

        2KV

        0P5~270

        0P5~330

        4R0~680

        6.5

        5.0

        5.0

        7.5

        10.0

        0.45

        0.55

        CC81-08

        300~680

        470~560

        820~101

        8.0

        5.0

        CC81-10

        820~101

        680~101

        121~271

        10.0

        5.0

        CC81-06

        3KV

        2P0~120

        2P0~220

        2P0~220

        6.5

        6.0

        7.5

        10.0

        0.55

        CC81-08

        150~220

        250~300

        250~330

        8.0

        6.0

        CC81-10

        240~330

        330~390

        390~560

        10.0

        6.0

        CC81-12

        470


        680~820

        12.5

        6.0

        CC81-14



        101~221

        14.0

        6.0

        CC81-16

        101



        16.0

        6.0

        CC81-06

        6KV

        2P0~120

        2P0~150

        2P0~150

        6.5

        7.0

        7.5

        10.0

        0.55

        CC81-08

        150~220

        180~220

        180~270

        8.0

        7.0

        CC81-10

        240~330

        240~270

        300~390

        10.0

        7.0

        CC81-12

        470


        470~680

        12.5

        7.0

        CC81-14



        820~151

        14.0

        7.0

        CC81-16

        101



        16.0

        7.0

        model and size code

        產品型號及尺寸代碼

        VDC

        額定直流電壓

        Nominal capacitance標稱電容量

        size尺寸(mm)

        Temperature coefficient of capacitance group電容量溫度系數組別

        Dmax

        Tmax

        F

        d

        ±0.1

        2B/2X

        LR

        BN

        2E

        2F

        CT1-05

        50V

        101~152

        /

        /

        222~502

        102~103

        5.5

        4.0

        5.0

        0.45

        CT1-06

        182~332

        /

        /

        822~103

        103

        6.5

        4.0

        5.0

        CT1-08

        392~562

        /

        /


        103~153

        8.0

        4.0

        5.0

        CT1-10

        682

        /

        /


        153~223

        10.0

        4.0

        5.0

        CT1-12

        822~103

        /

        /



        12.5

        4.0

        5.0

        CT1-05

        500V

        101~561

        /

        /

        102~222

        102~332

        5.5

        4.0

        5.0

        0.45

        0.55

        CT1-06

        681~122

        /

        /

        272~392

        392~562

        6.5

        4.0

        5.0

        CT1-08

        152~272

        /

        /

        472~682

        682

        8.0

        4.0

        5.0

        CT1-10

        332~392

        /

        /

        103~123

        822~103

        10.0

        4.0

        5.0

        CT1-12

        472~682

        /

        /


        123~223

        12.5

        4.0

        5.0

        CT1-14

        822~103

        /

        /


        333

        14.0

        4.0

        5.0

        CT81-06

        1KV

        101~681

        101~471

        101~102

        821~222

        102~272

        6.5

        4.0

        5.0

        0.45

        CT81-08

        821~152

        561~102

        102~182

        272~392

        332~682

        8.0

        4.0

        CT81-10

        182~222

        122~182

        222~332

        472~682

        103

        10.0

        4.0

        CT81-12

        272~472

        22~2272

        392~472

        822~103

        103

        12.5

        4.0

        7.5

        10.0

        0.55

        CT81-14

        562

        332~392

        562


        223

        14.0

        4.0

        CT81-16

        682

        472

        682



        16.0

        4.0

        CT81-18

        103


        103


        333473

        18.0

        4.0

        CT81-06

        2KV

        10~1471

        151~331

        101~561

        102~122

        102~222

        6.5

        5.0

        5.0

        0.45

        CT81-08

        561~102

        391~561

        681~102

        152~222

        272~332

        8.0

        5.0

        CT81-10

        122~181

        681~102

        122~152

        272~392

        392~562

        10.0

        5.0

        CT81-12

        222~272

        122~152

        182~272

        472~682

        682~103

        12.5

        5.0

        7.5

        10.0

        0.55

        CT81-14

        332~392

        222

        332

        103

        103

        14.0

        5.0

        CT81-16

        472

        272~332

        392~472


        153

        16.0

        5.0

        CT81-18

        562~682

        392

        562~682


        223

        18.0

        5.0

        CT81-06

        3KV

        101~331


        101~331

        102

        102~152

        6.5

        6.0

        7.5

        10.0

        0.55

        CT81-08

        391~561

        151~331

        391~471

        122~152

        182~222

        8.0

        6.0

        CT81-10

        681~102

        391~681

        681~122

        182~272

        272~392

        10.0

        6.0

        CT81-12

        122~182

        821~102

        152~182

        332~472

        472~682

        12.5

        6.0

        CT81-14

        222


        222~272

        562~682

        103

        14.0

        6.0

        CT81-06

        6KV

        101~271

        /

        101~221

        471~561

        102

        6.5

        7.0

        7.5

        10.0

        0.55

        CT81-08

        331~391

        /

        331~391

        681~102

        152~182

        8.0

        7.0

        CT81-10

        471~680

        /

        471~681

        122~182

        222~272

        10.0

        7.0

        CT81-12

        821~122

        /

        102

        222~332

        332~472

        12.5

        7.0

        CT81-14

        152~182

        /


        392

        562~682

        14.0

        7.0

        model and size code

        產品型號

        尺寸代碼

        VDC額定直流電壓

        Temperature characteristics溫度特性

        SIZE尺寸(mm)

        3B

        3E

        3F

        Dmax

        Tmax

        F

        d

        ±0.1

        Nominal capacitance標稱電容量

        CS1-05

        10V

        16V

        25V

        50V

        628~103

        103~333

        103~473

        5.5

        4.0

        5.0

        0.45

        CS1-06

        123~223

        303~473

        563~104

        6.5

        4.0

        5.0

        CS1-08

        333~503

        473~104

        104~154

        8.0

        4.0

        5.0

        CS1-10

        563~683

        823~104

        184~224

        10.0

        4.0

        5.0

        CS1-12

        823~104



        12.5

        4.0

        5.0

        CS1-05

        100V



        103~223

        5.5

        4.0

        5.0

        0.45

        CS1-06

        103~153

        223~333

        333~473

        6.5

        4.0

        5.0

        CS1-08

        203~223

        473~683

        563~104

        8.0

        4.0

        5.0

        CS1-10

        333~393

        823~104

        823~104

        10.0

        4.0

        5.0

        CS1-12

        473~683


        224

        12.5

        4.0

        5.0

        N0.

        item項目

         

        specitication試驗結果(規格值)

         

        Test method and test condition

        試驗條件


        7

        Temperature characteristic

        溫度特性

         

        NP0:(0±60 ppm/

        SL:(+140~-1000ppm/

        Temperature measurements in the following phase capacity value: (for T3 in base)

        在下列階段溫度測量容量值:基準T3

        step步驟 Temperature溫度T120±2℃T2-25±2℃T320±2℃T485±2℃T520±2℃

         


        8

        Robustness of terminations引出端強度

         

        tensile拉力

         

        S(mm)tensile拉力 0.35<S≤0.5>5N0.5<S≤0.8>10 N

         

        Fixed capacitor’body and Lead wire , lower lead wire.固定電容器本體和引腳,向下拉動引腳。

         


        Bending

        彎曲

         

        Lead wire shall not cut off.

        Capacitor shall not be broken.

        No visible damage.引線無斷裂,本體無損傷,無可見損傷

         

        Two times in a row in each direction bending, tension F=5N在每個方向上連續進行兩次彎曲,拉力F=5N

         


        9

        Resistance to soldering heat

        耐焊接熱

         

        Appearancecheck

        外觀檢查

        no visible damage,mark clear無可見損傷,標志清晰

         

        Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

        不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

        Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5S

        Measurement of recovery for 24 ± 2 hours under standard conditions在標況下恢復24±2小時測量

         


        Capacitance change

        容量變化率

         

        NPO:±0.5%

        SL:±1%


        Insulation resistance絕緣電阻

        IR≥10000MΩ


        voltage proof

        耐電壓

        No permanent break-down or flashover during the test period

        無擊穿或飛弧

         

         




        N0.

        item項目

        specitication試驗結果(規格值)

        Test method and test condition

        試驗條件


        10

        solderability可焊性

         

        Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.包錫良好,在3秒內流合。

         

        Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

        不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

        Solder bath temperature焊錫溫度260±5℃Solder bath temperature焊錫時間2±0.5S

         


        11

        Rapid change of temperature

        (temperature cycling)

        溫度快速變化

        (溫度循環)

         

        No visible damage. mark clear.

        無可見損傷,標志清晰

         

        Following step 1 loop, loop 5 times

        以下步驟為1個循環,循環5次

        step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃30minutes420±2℃3minutes

         


        12

        vibration振動

         

        No visible damage. mark clear.

        Capacitance: -20%≤ΔC/C≤+20%

        無可見損傷,標志清晰

        容量:-20%≤ΔC/C≤+20%

         

        frequency頻率

        10-55-10Hz 1minute

        amplitude of vibration振幅

        1.5mm

        direction方向:

        high and low,left and right, front and back side上下、左右、前后

        time時間:

        2hours

        condition狀態:

        sinusoidal wave正弦波振動


        13

        shock沖擊

         

        No visible damage. mark clear.

        Capacitance: -20%≤ΔC/C≤+20%

        外觀:標志清晰,本體無可見損傷

        容量:-20%≤ΔC/C≤+20%

         

        condition條件

        accelerated speed加速度:490m/s2

        pulse duration脈沖持續時間:11ms

        direction方向:X Y Z

        number of times次數:3times




        N0.

        Item

        項目

        specitication試驗結果(規格值)

         

        Test method and test condition

        試驗條件


        14

        Damp heat steady state

        穩態

        濕熱

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度40±2℃Relative humidity相對濕度90%~95%time時間500(+24/-0)Hours

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時后測量

         

        capacitance change

        容量變化率

        NP0:±2%max

        SL: ±3%max

        Dissipation factor

        損耗角正切

         

         

        Capacitance電容量QtgδC<30pF≥200+10C1/QC ≥30pF≥500≤0.002

         

        Insulation resistance

        絕緣電阻

        5000MΩmin

        15

        Damp heat steady state

        (charge)穩態濕熱

        (負荷)

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度40±2℃Relative humidity相對濕度90%~95%Voltage電壓額定電壓Rated  voltagetime時間500(+24/-0)小時

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時后測量

        capacitance change

        容量變化率

        NP0:±2%max

        SL: ±3%max

        Dissipation factor

        損耗角正切

         

         

        CAP.(C)QtgδC<30pF≥200+10C1/QC ≥30pF≥500≤0.002

         

        Insulation resistance

        絕緣電阻

        5000MΩmin

        16

        Endurance耐

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度125±2℃Voltage電壓1.5URTime時間1000(+48/-0)hours

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時內測量

         

        capacitance change

        容量變化率

        NP0:±3%max

        SL: ±5%max

        Dissipation factor

        損耗角正切

         

         

        Capacitance靜電容量QtgδC<30pF≥270+14C1/QC ≥30pF≥667≤0.0015

         

        Insulation resistance

        絕緣電阻

         

        5000MΩmin

        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition試驗條件

        1

        Operating temperature rang

        適用溫度范圍

         

        B、E、F、R

        -25~+85,Includes capacitors heating包括電容器自身發熱

        This continuous use temperature range

        可在此溫度范圍內連續使用

         

        X

        Includes capacitors heating -55~+125,包括電容器自身發熱

        2

        Appearance and size check

        外觀和尺寸檢查

         

        Component surfaces clean, as attachment, mark clear, no visible damage, dimensional compliance requirements

        元件表面清潔,無異物附著,標志清晰,

        無可見損傷,尺寸符合規定要求

        Visually inspect the product appearance

        Dimension checked  by calipers.目測檢查產品外觀

        尺寸用游標卡尺檢查

        3

        Capacitance

        電容量

        Within the scope of the permitted deviation level在允許的偏差等級范圍內

        Testing temperature

        溫度:25 ±3

        Testing frequency

        頻率:f=1KHz±20%

        Testing voltage

        電壓:1.0±0.1Vrms

         

        4

        Dissipation factor

        損耗角正切(tgδ)

        2B、2E、2X:tgδ≤2.5%

        LR、LB:  tgδ≤0.5%

        2F:  tgδ≤5.0%

        5

        Insulation resistance

        絕緣電阻

         

        IR≥4000MΩ

        Rated voltage額定電壓applied voltage測試電壓time時間current電流50、 500VUR60±5s≤0.05A1KV、2KV3KV、6KV500V60±5s≤0.05A

         

        6

        voltage proof耐電壓

         

        Between lead wire端子之間

         

        No permanent break-down or flashover during the test period

        無擊穿或飛弧

         

        Rated voltage額定電壓applied voltage測試電壓time時間current電流50、500V2.5UR1~5s≤0.05A1KV2UR1~5s≤0.05A2KV、3KV1.5UR+5001~5s≤0.05A6KV1.5UR1~5s≤0.05A

         

        Body insulation端子與外殼之間

         

        Used by metal balls, voltage application DC1500V testing 1-5s, charge and discharge current ≤ 0.05A

        使用金屬小球法,施加電壓DC1500V測試1-5s,充放電電流≤0.05A


        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition

        試驗條件

        7

        Temperature characteristic

        溫度特性

         

        2B:(-10%~+10%)

        2X:(-15%~+15%)

        LR:(-15%~+15%)

        2E:(-56%~+22%)

        2F: (-80%~+30%)

        LB:(-10%~+10%)

        Temperature measurements in the following phase capacity value: (for T3 in base)

        在下列階段溫度測量容量值:基準T3

        Step步驟Temperature溫度T120±2T2-25±2T320±2T485±2T520±2

         

        8

        Robustness of terminations引出端強度

         

        tensile拉力

         

        S(mm)Tensile拉力0.35<S≤0.5>5N0.5<S≤0.8>10 N

         

        Fixed capacitor’body and Lead wire , lower lead wire.

        固定電容器本體和引腳,向下拉動引腳。

         

        bending彎曲

         

        Lead wire shall not cut off.

        Capacitor shall not be broken.

        No visible damage.

        引線不斷裂

        電容器不被損傷

        無可見損傷

        Two times in a row in each direction bending, tension F=5N

        在每個方向上連續進行兩次彎曲,拉力F=5N

         

        9

        耐焊接熱

        Resistance to

        soldering heat

        Appearance check

        外觀檢查

        no visible damage

        無可見損傷,標志清晰

         

        Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

        不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

        Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5S

        Measurement of recovery for 24 ± 2 hours under standard conditions

        在標況下恢復24±2小時測量

         

        Capacitance change

        容量變化率

         

        2B、2X :±10%max

        LR: ±15%max

        2E、2F:±20%max

        BN: ±10%max

        Insulation resistance絕緣電阻

        IR≥4000MΩ

        voltage proof

        耐電壓

         

        No permanent

         break-down or flashover during the test period

        無擊穿或飛弧

        10

        Solderability

        可焊性

         

        Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.

        包錫良好,在3秒內流合。

         

        Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

        不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

        Solder bath temperature焊錫溫度260±5℃Solder bath temperature焊錫時間2±0.5S


        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition

        試驗條件

        11

        Rapid change of temperature

        (temperature cycling)

        溫度快

        速變化

        (溫度循環)

         

        Appearance check

        No visible damage. mark clear.

        外觀檢查:

        無可見損傷,標志清晰

         

        Following step 1 loop, loop 5 times

        以下步驟為1個循環,循環5次

        step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃2X:125±2℃30minutes420±2℃3minutes

         

        12

        Vibration

        振動

         

        Appearance check and measurement:

        No visible damage. mark clear.

        Capacitance:-20%≤ΔC/C≤+20%

        最后檢查、測量和要求:

        無可見損傷,標志清晰

        容量:-20%≤ΔC/C≤+20%

         

        frequency頻率

        10-55-10Hz 1minute

        amplitude of vibration振幅

        1.5mm

        direction方向:

        high and low,left and right, front and back side上下、左右、前后

        time時間:

        2hours

        condition狀態:

        sinusoidal wave正弦波振動

        13

        Shock

        沖擊

         

        Appearance check and measurement:

        No visible damage. mark clear.

        Capacitance:-20%≤ΔC/C≤+20%

        最后檢查、測量和要求:

        外觀:標志清晰,本體無可見損傷

        容量:-20%≤ΔC/C≤+20%

         

        condition條件

        accelerated speed加速度:490m/s2

        pulse duration脈沖持續時間:11ms

        direction方向:X Y Z

        number of times次數:3times

        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition

        試驗條件


        14

        Damp heat steady state

        穩態

        濕熱

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度40±2℃Relative humidity相對濕度90%~95%Time時間500(+24/-0)Hours

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時后測量

         

        capacitance change

        容量變化率

        2B、2X:±10%max

        LR、LB:±15%max

        2E:±20%max

        2F:±30%max

        Dissipation factor

        損耗角正切

         

        2B、2X:0.050max

        2E、2F:0.070max

        LR、LB:0.070max

        Insulation resistance絕緣電阻

        2000MΩmin

        15

        Damp heat steady state

        (charge)穩態濕熱

        (負荷)

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度40±2℃Relative humidity相對濕度90%~95%Voltage電壓Rated voltage額定電壓 Time時間500(+24/-0)小時

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時后測量

        capacitance change

        容量變化率

        2B、2X:±10%max

        LR、LB:±15%max

        2E:±20%max

        2F:±30%max

        Dissipation factor

        損耗角正切

         

        2B、2X:0.050max

        LR、2E、2F:0.070max

        BN:0.070max

        Insulation resistance絕緣電阻

        2000MΩmin

        16

        Endurance

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

         

        temperature溫度125±2℃(2X)85±2℃(2B 2R 2E 2F BN)Voltage電壓 1.5倍額定電壓時間time1000(+48/-0)小時

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時內測量

         

        capacitance change

        容量變化率

        2B、2X、LR、2E:±20%max

        2F: ±30%max

        LB:±20%max

        Dissipation factor

        損耗角正切

         

        2B、2X:0.050max

        LR、2E、2F:0.070max

        LB:0.070max

        Insulation resistance絕緣電阻

        2000MΩmin

        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition試驗條件

        1

        Operating temperature rang

        適用溫度范圍

        Includes capacitors heating -25~+85,包括電容器自身發熱

        This continuous use temperature range

        可在此溫度范圍內連續使用

        2

        Appearance and size check

        外觀和尺寸檢查

         

        Component surfaces clean, as attachment, mark clear, no visible damage, dimensional compliance requirements

        元件表面清潔,無異物附著,標志清晰,

        無可見損傷,尺寸符合規定要求

        Visually inspect the product appearance

        Dimension checked  by calipers.目測檢查產品外觀

        尺寸用游標卡尺檢查

        3

        Capacitance

        電容量

        Within the scope of the permitted deviation level在允許的偏差等級范圍內

        Testing temperature

        溫度:25 ±3

        Testing frequency

        頻率:f=1KHz±20%

        Testing voltage

        電壓:0.1±0.05Vrms

         

        4

        Dissipation factor

        損耗角正切(tgδ)

        3B、3E、3F:(tgδ)≤5.0%

        5

        Insulation resistance

        絕緣電阻

         

        10V≤UR≤25V:

        IR≥100MΩ

        UR>25V:

        IR≥1000MΩ

        Rated voltage額定電壓applied voltage測試電壓time時間current電流10~100VUR60±5s≤0.05A

         

        6

        voltage proof耐電壓

         

        Between lead wire端子之間

         

        No permanent break-down or flashover during the test period

        無擊穿或飛弧

         

        Rated voltage額定電壓applied voltage測試電壓time時間current電流50V1.5UR1~5s≤0.05A100V1.5UR1~5s≤0.05A

         

        Body insulation端子與外殼之間

         

        Used by metal balls, voltage application DC150V testing 1-5s, charge and discharge current ≤ 0.05A使用金屬小球法,施加電壓DC150V測試1-5s,充放電電流≤0.05A


        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition

        試驗條件

        7

        Temperature characteristic

        溫度特性

         

        3B:(-10%~+10%)

        3E:(-56%~+22%)

        3F:(-82%~+22%)

        Temperature measurements in the following phase capacity value: (for T3 in base)

        在下列階段溫度測量容量值:基準T3

        Step步驟Temperature溫度T120±2T2-25±2T320±2T485±2T520±2

         

        8

        Robustness of terminations引出端強度

         

        tensile拉力

         

        S(mm)Tensile拉力0.35<S≤0.5>5N0.5<S≤0.8>10 N

         

        Fixed capacitor’body and Lead wire , lower lead wire.

        固定電容器本體和引腳,向下拉動引腳。

         

        bending彎曲

         

        Lead wire shall not cut off.

        Capacitor shall not be broken.

        No visible damage.

        引線不斷裂

        電容器不被損壞

        無可見損傷

        Two times in a row in each direction bending, tension F=5N

        在每個方向上連續進行兩次彎曲,拉力F=5N

         

        9

        Resistance to

        soldering heat

        耐焊接熱

         

        Appearance check

        外觀檢查

        no visible damage

        無可見損傷,標志清晰

        Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

        不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

        Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5S

        Measurement of recovery for 24 ± 2 hours under standard conditions

        在標況下恢復24±2小時測量

         

        Capacitance change

        容量變化率

         

        3B:±10%max

        3E、3F、±20%max

        Insulation resistance絕緣電阻

        IR≥100MΩ

        voltage proof

        耐電壓

        Within the scope of the initial specifications

        在初期規格范圍之內

        10

        可焊性

        solderability

        包錫良好,在3秒內流合。

        Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.

        不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

        Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

        焊錫溫度Solder bath temperature235±5℃焊錫時間Solder bath temperature2±0.5S


        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition

        試驗條件

        11

        Rapid change of temperature

        溫度快

        速變化

        (溫度循環)

         

        Appearance check

        No visible damage. mark clear.

        外觀檢查:

        無可見損傷,標志清晰

         

        Following step 1 loop, loop 5 times

        以下步驟為1個循環,循環5次

        step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃30minutes420±2℃3minutes

         

        12

        Vibration

        振動

         

        Appearance check and measurement:

        No visible damage. mark clear.

        Capacitance:-20%≤ΔC/C≤+20%

        最后檢查、測量和要求:

        無可見損傷,標志清晰

        容量:-20%≤ΔC/C≤+20%

         

        frequency頻率

        10-55-10Hz 1minute

        amplitude of vibration振幅

        1.5mm

        direction方向:

        high and low,left and right, front and back side上下、左右、前后

        time時間:

        2hours

        condition狀態:

        sinusoidal wave正弦波振動

        13

        Shock

        沖擊

         

        Appearance check and measurement:

        No visible damage. mark clear.

        Capacitance:-20%≤ΔC/C≤+20%

        最后檢查、測量和要求:

        外觀:標志清晰,本體無可見損傷

        容量:-20%≤ΔC/C≤+20%

         

        condition條件

        accelerated speed加速度:490m/s2

        pulse duration脈沖持續時間:11ms

        direction方向:X Y Z

        number of times次數:3times

        N0.

        Item

        項目

        Specitication

        試驗結果(規格值)

        Test method and test condition

        試驗條件


        14

        Damp heat steady state

        穩態

        濕熱

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度40±2℃Relative humidity相對濕度90%~95%Time時間500(+24/-0)Hours

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時后測量

         

        capacitance change

        容量變化率

        3B:±10%max

        3E、3F:±20%max

        Dissipation factor

        損耗角正切

        3B:0.07 max

        3E、3F:0.1max

        Insulation resistance絕緣電阻

        100MΩmin

        15

        Damp heat steady state

        (charge)穩態濕熱

        (負荷)

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度40±2℃Relative humidity相對濕度90%~95%Voltage電壓Rated voltage額定電壓Time時間500(+24/-0)小時

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時后測量

         

        capacitance change

        容量變化率

        3B:±10%max

        3E、3F:±20%max

        Dissipation factor

        損耗角正切

         

        3B:0.07 max

        3E、3F:0.1max

        Insulation resistance絕緣電阻

        100MΩmin

        16

        Endurance耐

         

        Appearance check

        外觀檢查

        No visible damage. mark clear.

        無可見損傷,標志清晰

        temperature溫度85±2℃Voltage電壓1.5 times rated voltage 1.5倍額定電壓Time時間1000(+48/-0)hurs

        Measurement of recovery for 24 ± 2 hours under standard conditions

        標況下恢復24±2小時內測量

         

        capacitance change

        容量變化率

        3B、3E、3F:±20%max

        Dissipation factor

        損耗角正切

        3B:0.07max

        3E、3F:0.1max

        Insulation resistance絕緣電阻

        100MΩmin



        日韩在线视频免费,视频一区 日本 99,黄色网站黄色在线电影,日本和亚洲手机在线看视频